Miracle Sealants Tile and Stone Cleaner offers an economical value for the exceptional quality:
16 oz Bottle – $18.99
32 oz Bottle – $19.99
1 Gallon Bottle – $94.99
5 Gallon Bucket – $259.99
 
Tile & Stone Cleaner is a versatile solution that cleans tile, grout, marble, limestone, slate, travertine, brick, concrete and masonry surfaces. This cleaner is strong enough to tackle most difficult stains, but is gentle enough for daily use. Tile & Stone Cleaner is available as a ready-to-use spray and a concentrate.
 
Tile and stone surfaces add beauty and elegance to any space, but keeping them looking pristine can be a challenge. Regular cleaning is essential to prevent buildup of dirt, grime, and stains. However, many conventional cleaners are too harsh and can damage delicate tile, stone, and grout. This is where a specialty cleaner like Miracle Sealants Tile and Stone Cleaner really shines.
 
How To Use Miracle Sealants Tile And Stone Cleaner
Miracle Sealants Tile and Stone Cleaner can be used on a variety of surfaces, including ceramic and porcelain tile, natural stone, masonry, concrete, and grout. It is safe for everyday use and gentle enough that it will not etch or damage surfaces. Here are some tips for getting the most out of this cleaner:
Always test on an inconspicuous area first to check for colorfastness.
Apply a light mist directly to the surface using a spray bottle.
Allow the cleaner to dwell for 2-3 minutes.
Agitate with a stiff nylon brush, sponge, or cloth. Scrub gently in a circular motion.
Rinse thoroughly with clean water.
A second application may be needed for porous, heavily soiled, or stained areas.
Buff dry with a soft cloth or microfiber towel.
For grout haze removal, allow cleaner to dwell for 3-5 minutes before scrubbing and rinsing.
Stronger dilution may be needed for extremely dirty areas.
Proper dwell time and agitation are key to allowing the cleaner to break down and dissolve dirt, oils, and grime before rinsing. Always rinse thoroughly, as any residue left behind can lead to streaking or hazing on the surface.
Surfaces For Use
Miracle Sealants Tile and Stone Cleaner can safely be used on a wide variety of surfaces, including:
Ceramic and porcelain tile – Safe for glazed and unglazed tile.
Natural stone – Including granite, marble, travertine, limestone, and slate.
Masonry – Safe for concrete, brick, and other masonry.
Grout – Removes dirt, stains, and grout haze.
Concrete – Effective on stains and dirt on concrete.
Fiberglass and acrylic – Safe for tubs, showers, and sinks.
Outdoor surfaces – Patios, pool decks, stone walls, walkways, etc.
Countertops – Granite, marble, and other natural stone or ceramic countertops.
The cleaner is even safe enough for more delicate surfaces like polished marble, travertine, and limestone. It will not etch or cause damage with proper dilution and rinsing. Test first on an inconspicuous spot to verify compatibility. Not recommended for use on wood floors.
 
Safety On Natural Stone
A major concern when shopping for stone cleaners is choosing one that won’t cause etching or other damage. Miracle Sealants Tile and Stone Cleaner is formulated to be safe and effective on even the most porous natural stones:
pH balanced formula – Won’t disrupt stone’s pH balance leading to etching.
Sealer-safe – Won’t strip off protective sealers.
Low-odor and fume-free – Safer for user and indoor air quality.
Biodegradable ingredients – More environmentally friendly.
Non-abrasive – Gentle scrubbing motion only.
Always test first on an out-of-sight area and follow dwell time instructions to allow cleaner to work properly before rinsing. Proper dilution and avoiding overuse also helps prevent any possible damage to natural stone surfaces.
Using On Grout
Grout lines inevitably absorb dirt and stains over time. Miracle Sealants Tile and Stone Cleaner can help restore dingy, discolored grout lines back to like-new condition:
Penetrates porous grout to lift dirt and stains from below the surface.
Removes soap scum, hard water deposits, and mineral buildup.
Bleaches out stubborn organic stains.
Whitens discolored or faded grout.
Effective on sanded and non-sanded grout.
Safe enough for frequent cleaning maintenance.
Apply directly to grout lines and allow 3-5 minutes dwell time before scrubbing and rinsing. Be patient and let the cleaner work before attempting to scrub off grime. Thorough rinsing is key to avoid hazy residue on grout.
Ingredient Overview
 
Leaves No Residue
One of the most frequent complaints about specialty cleaners is the annoying visible residue left behind. Miracle Sealants Tile and Stone Cleaner rinses clean without leaving any sticky, slippery, or chalky mess:
Removes all dirt instead of leaving it behind.
Will not streak or haze polished stone.
Water-based formula does not leave oily residue.
Designed to fully rinse away after cleaning.
No tacky or slippery feeling leftover.
Follow with damp mopping and buff drying.
Thoroughly rinse all surfaces and wipe up any puddled water to ensure no residue remains. Test new materials first to ensure full compatibility.